Posts tagged with: France

The Ametek Jofra CTC1200A Compact Temperature Calibrator is an industrial mid-range compact dry-block temperature calibrator that makes it especially ideal for use in all industries temperature sensor calibration from (300 to 1205°C) or (572 to 2200°F). The CTC series is...
Continue Reading →
The Seil Seres SS-2000 is suitable to be retrofitted to all Tanker Ships build before the year 2005. ODME SS-2000 is required by MARPOL regulations and it’s a system for controlling the discharge into the sea of the oily products...
Continue Reading →
The ODM 2000 is a system to determine and monitor the ship’s oily water discharge according to the rule of MARPOL 73/78 and MEPC 108(49). ODM 2000 is composed of a controller and oil content meter, a hydraulic package ,...
Continue Reading →
The DPC-700 is a hand operated digital pressure calibrator. It uses a hydraulic pump with a maximum output pressure of 700 bar. The pressure medium is hydraulic oil/distilled water. The unit is supplied with a special connection for test cock...
Continue Reading →
The PC-40 is a hand operated pressure calibrator. It uses a hydraulic pump with a maximum output pressure of 700 bar. Normal working pressure is 300 bar (1700 psi). The unit is supplied with a 100 cm flexible hose with...
Continue Reading →
  This remarkable calibrator features deadweight tester accuracy in a modern digital package. The APC is available as an calibrator or in one of 6 test-ready systems that are complete and equipped to meet your pressure calibration needs. The APC...
Continue Reading →
Dry Block Calibrator that meets all classification requirements. The calibrator comes with a traceable calibration certificate, and in a solid carrying case. Low weight means that the calibrator is suitable for calibration on the spot. The calibrator is user friendly....
Continue Reading →
PYROS 125 It cover a range from -24 to 125 °C. It has a stability of ±0,05 °C and a precision of ±0,25 °C. The time taken to reach -20 °C is just 17 minutes and the time to reach...
Continue Reading →
DRY-BLOCK FUNCTION CALIBRATOR The optimum thermal coupling from the block to test item is achieved with the correct adapter sleeve. Ideally, the internal diameter of the sleeve is 0.5 mm larger than the outer diameter of the test item. With...
Continue Reading →