Posts tagged with: Calibration

Techcross CPC Ex ECS-3000X1 ballast water management system based on electrochemical treathment method Ballast Water Management System had been initiated by new marine environment regulations at IMO, therefore Techcross is keenly pursuing an environmental business. ECS (Electro-CleenTM System), however, is not...
Continue Reading →
The VEGABAR 86 is a submersible pressure transmitter for level measurement in wells, basins and open vessels. Thanks to the flexibility through different cable and tube versions, VEGABAR 86 can be used in various applications. The simple connection of VEGABAR...
Continue Reading →
The GBA-155 Bilge Alarm meets the requirements of IMO Resolution MEPC 107 (49) and has the Type-Approval Certificate in accordance with IMO Resolution MEPC 107 (49), therefore this satisfy international convention. The GBA-155 Bilge Alarm serves to continuously measure the...
Continue Reading →
KSB Seil Seres S-3000 is required by MARPOL regulations and it’s a system for controlling the discharge into the sea of the oily products in ballast from the cargo spaces of tankers. This equipment is in full compliance with the...
Continue Reading →
The System is approved in accordance with Resolution A 586 (XIV) and MEPC 51 (32) for Oily Products and also for oily substances. This equipment is in full compliance with IMO RES A 586(XIV) – MEPC 51 (32) for Tanker...
Continue Reading →
The model CEP3000 hand-held temperature calibrator is an ideal instrument to handle all your temperature calibration tasks in a rugged, inexpensive package. It combines virtually all widely-used thermocouples and resistance thermometers in one instrument. You will never have to worry...
Continue Reading →
The Ametek Jofra CTC1200A Compact Temperature Calibrator is an industrial mid-range compact dry-block temperature calibrator that makes it especially ideal for use in all industries temperature sensor calibration from (300 to 1205°C) or (572 to 2200°F). The CTC series is...
Continue Reading →
The Seil Seres SS-2000 is suitable to be retrofitted to all Tanker Ships build before the year 2005. ODME SS-2000 is required by MARPOL regulations and it’s a system for controlling the discharge into the sea of the oily products...
Continue Reading →
The ODM 2000 is a system to determine and monitor the ship’s oily water discharge according to the rule of MARPOL 73/78 and MEPC 108(49). ODM 2000 is composed of a controller and oil content meter, a hydraulic package ,...
Continue Reading →
MM2000, Martek Marine. Fixed Gas Detection. The MM2000 system tests for toxic and flammable gases in a range of situations. Twin green/amber/red LEDs for power, fault, and alarm on the controller with an in-built internal buzzer for alarm/fault warnings ensure...
Continue Reading →