+34 661 707 124
Torres de Hercules, Crtra Termica, 11379, Los Barrios, Cadiz, Spain

Recent Services 2017

Recent Services 2017

Photo 1

I

Arklow Day

Project

1. 15 ppm bilge alarm replacement on OWS:

Replaced bilge alarm data:
Maker: Deckma Model: OMD-2005 SN: 1012637 Measuring cell SN: 5019726

New bilge alarm installed on board:
Maker: Brannström Model: Bilgmon 488 MCU SN: 4A-2470
Measuring Cell SN: 1B-1289

Photo 1

I

SEACROSS

Project

1. UTI calibration and repair:
Maker: MMC Model: D-2401-2 SN: 13486

2. UTI calibration and repair:
Maker: MMC Model: D-2401-2 SN: 22031

Photo 1

I

Tour Pomerol

Project

1. ODME annual survey
Maker: Brannström Model: Cleantrack 1000B SN: CTB2235
Measuring cell SN: MCB-347

Photo 1

I

Bahia Uno

Project

1. CCTV System repair
2. Oily Water Separator calibration and annual inspection

Photo 1

I

Doric Pioneer

Project

1. 2 x UTI calibration:
Maker: MMC Asia Model: D-2401-2 SN: 5420
SN: 5421
2. 5 x Portable gas detector calibration:
Maker: MSA Model: Altair 4X SN: 00189770
SN: 00189781

Maker: GMI Model: Shipsurveyor 6 SN: 701388
SN: 701381

Maker: RKI Model: GX-8000 SN: 2Z6075083

3. Fixed Gas Sampling calibration:
Maker: Salwico Model: SW2020 SN: 1993859

HC sensor SN: Z1258612260152
H2S sensor SN: 7005460

Photo 1

I

Chemtrans Riga

Project

1. Pressure Gauge inspection and calibration: Maker: Vimex, Model: 0-300 Bars SN: 622535
2. Pressure Gauge inspection and calibration: Maker: Wika, Model: 0-40 Bars SN: 1102G2OK
3. Pressure Gauge inspection and calibration: Maker: Wika, Model 0-10 Bars SN: 22104F1
4. Temperature calibrator inspection: Maker: Vimex, Model: TC-600 SN: 6300/210´2001
5. Portable gas inspections and calibrations:
•RIKEN KEIKI GX-2009 [S/N 398043061RN]
•RIKEN KEIKI GX-2009 [S/N 368022736RN]
•RIKEN KEIKI GX-2009 [S/N 368022755RN]
•RIKEN KEIKI GX-2009 [S/N 398043062RN]
•RIKEN KEIKI GX-2009 [S/N 156020461RN]
•RIKEN KEIKI GX-2009 [S/N 610071796RN]
•RIKEN KEIKI GX-2009 [S/N 610071795RN]
•RIKEN KEIKI GX-8000 [S/N 377015649]

Photo 1

I

Walleye

Project

1. 15 PPM bilge alarm calibration:
Maker: Deckma Model: OMD-21 SN: 215109

2. ODME calibration service was not carried out due to it has been cancelled as per Superintendent and Captain noticed on board.

Photo 1

I

Xpress Monte Cervino

Project

1. OWS 15 ppm bilge alarm calibration:
Maker: Deckma Model: OMD-11 SN: 117010

Photo 1

I

Torm Laura

Project

1. UTI calibration:
Maker: Enraf Tanksystem Model: Gtex SN: G18606
2. Hermetic pressure gauge calibration:
Maker: Enraf Tanksystem
3. Temperature calibrator calibration:
Maker: Ametek Model: CTC-650B SN:561629-00446
4. Digital pressure gauge inspection:
Maker: Ametek Model : Jofra IPI SN: 9226212

Photo 1

I

Al Andalus Express

Project

1. 4021B Rate limiter card potentiometer replacement
Maker: Lips Model: Ancos 4000 SN: H02407

Photo 1

I

Luz de Mar

Project

1. 15 ppm OWS Bilge alarm calibration:
Maker: Deckma Model: OMD-21 SN: 212974

Time sheet:
Starting hour: 9:30
Finishing hour: 11:00

Photo 1

I

Al Andalus Express

Project

1. New 15 PPM alarm install:
Maker: Brannström Model: Bilgmon 488 Master Unit SN: 4A-2332
Measuring Cell SN: 1B-1067

Photo 1

I

Al Andalus Express

Project

1. 4021 Rate limiter card from PS engine control system repair:
Maker: Lips. Model: Ancos 4000 SN: H02407

Photo 1

I

MINERVA ASTRA

Project

1. Temperature calibrator calibration: Maker: Omicron, Model: OTE-P700 SN: 17503
2. Pressure calibrator calibration: Maker: Omicron, Model: OTE-P202 SN: 13388
3. Calibration and check of the UTI - HERMetic MK3 LBI UNI S/N: 10201A.
4. Portable gas inspection and calibrations:
•RIKEN KEIKI GX-2009 [S/N 145161291RN]
•RIKEN KEIKI GX-2009 [S/N 145161250RN]
•RIKEN KEIKI GX-2009 [S/N 145161242RN]
•RIKEN KEIKI RX-415 [S/N 1z6010039RN)
•ALTAIR 5X [S/N 06004788]

Photo 1

I

WALLEYE

Project

1. Calibration and check 3 UTI METTER:
Nº1 Make MMC International / Model: D-2401-2 / SN:11738
Nº2 Make MMC International / Model; D-2401-2 / SN:11739
Nº3 Make MMC International / Model: D-2401-2 / SN:19578

Photo 1

I

Al Andalus Express

Project

1. New 15 PPM alarm install:
Maker: Brannström Model: Bilgmon 488 Master Unit SN: 4A-1980
Measuring Cell SN: 1B-1005

Photo 1

I

Delmas Swala

Project

Inspection of 6 transmitter gauges of the ballast tank. Two of them has been calibrated.
Sensors maker: Kamstrup Mertro
Type: 03-16-113

Service hours:
From : 9:00
To: 15:00
From: 19:00
To: 13:30

Photo 1

I

MT BOMAR PLUTO

Project

1. Fixed gas sampling system calibration:
Maker: Consilium Model: SalwicoSW2020
Serial Number: 103761

Photo 1

I

African Sanderling

Project

1. OWS 15 ppm Bilge alarm repair and calibration:
Maker: Brannstrom Model: Bilgmon 488 MCU SN: EDA-1082
Measuring cell SN: EDB-1105

2. New main PCB installed on existing 15 ppm Bilge alarm MCU:
Main PCB SN: 4A-2299

Photo 1

I

Harverst Legend

Project

1. OWS 15 PPM Bilge alarm calibration:
Maker: Brannström Model: Bilgmon 488 SN: 4AE-0346
Measuring Cell SN: B9685

Photo 1

I

Meligunis M

Project

1. Oxygen analyzer calibration:
Maker: Teledyne Model: Model 3290
2. Nitrogen generator system inspection:
Maker: Generon Model: HPMB-6500 SN: MM066095

Photo 1

I

Front Loki

Project

1. Cargo tank gauging system inspection:
Maker: Rosemount (Emerson) Model: Tankradar STaR SN: R1780
2.Vapour alarm system calibration:
Maker: Omicron Model: OVS 2.1 OP B SN: 20080204-10

Photo 1

I

Drepanos

Project

1. Calibration and check 3 UTI METTER:
Nº1 Make: MMC / Model: D-2401-2 / SN: 4796J
Nº3 Make: MMC / Model: D-2401-2 / SN: 4770J
Nº4 Make: MMC / Model: D-2401-2 / SN: 4769J

Photo 1

I

Panarea M

Project

1. High level / Overvill alarm system inspection:
Maker: Panasia
2. MDO storage tank (P) level calibration
2. Temperature signal converter for stern tube FWD and AFT.
3. Oxygen analayzer calibration:
Maker: Green Instruments Model: G3500n

Photo 1

I

MT Vestholmen

Project

1. Calibration and check:
UTI meter model: GTEX
Serial number: G13767

Photo 1

I

Bahia Tres

Project

1. Sea-trails for the main engine control system. The engine timings and dynamics were test and approved by the master on board. The engines accelerate and decelerate simultaneously with same rate and dynamics. The engine safety of engage interlock was tested and working properly. The pressure switches for clutch confirmation have been tested and found properly actuating.

Photo 1

I

Stolt Ilex

Project

1. ODME repair service. The Power supply board of the ODME system Brannstrom Cleantrack 1000 was inspected and found faulty, we have replaced some components trying to solve the problem but unfortunately the PCB is damaged with signs of heating and burning on the initial power conversion part. Power components found burned such as power diodes and capacitors, after replacing we have not received results. The control voltage on points ABC still missing. Test have been accomplished according the manufacturers indication on power board trouble shooting manual. The power supply PCB should be replaced by new one, at this moment there was no way to recover the problem.

Time Sheet 12:30 to 19:30

Photo 1

I

High Strength

Project

1. ODME annual survey
Maker: Brannstrom Model: Cleantrack 1000 SN: CT873
2. UTI meter calibration:
Maker: Honeywell Enraf Tanksystem Model: G-Tex SN: G15502

Photo 1

I

Torm Alexandra

Project

1. ODME annual survey
Maker: Brannström Model: Cleantrack 1000B
SN: CTB-2436 / MCB-554

Photo 1

I

Winter Oak

Project

1. ODME annual survey:
Maker: KSM Seil Seres Model: S-3000 ver 2.0

Photo 1

I

Harbour First

Project

1. Portable gas Inspection
• RIKEN KEIKI GX-8000 [SN. 186020008EB]
• RIKEN KEIKI GX-8000 [SN. 1180000244]

2. Portable gas calibration
• RIKEN KEIKI GX-8000 [SN. 186020008EB]

Photo 1

I

Panarea M

Project

1. A/E 1 alarm repair and verification. All the alarms are cleared tested and found in a proper condition. Including Cylinder temperatures for all cylinders.
2. A/E 2 alarm repair and verification. All the alarms are cleared tested and found in a proper condition. Including Cylinder temperatures for all cylinders.
3. A/E 3 alarm repair and verification. After AE main board replacement and commissioning also TC sensor for turbo charger exhaust gas replacement. All the alarms are cleared tested and found in a proper condition. Including Cylinder temperatures for all cylinders.
4. Main engine tests for the remote telegraph on WH. The orders for adtern are not properly executed with Dead Slow order the engine starts and stops continuosly. For the order agead the engine responds correctly. Signal tracking and measres are needed to establish the reason of the problem.
4. Gas sampling system repair. The vacuum pump was repaired and tested. The automated test performed each 6 hours is done and passed. Also the %LEL sensor was calibrated with calibrated gas. Certificate will be issued for the gas sensor.
5. Emergency generator switchboard repair. The emergency generator was tested in test mode and found starting and connecting properly. Real blackout condition was tested and found recovering the power for emergency services.
6. Automation system alarms and sensors calibration and repair. Alarms channels repaired and cerified was: R,S,T windings for the AE generator 1,2,3, Cylinder temperature indication for the AE generator 1,2,3, Cylinder temperature deviation for the AE generator 1,2,3, N2 HFO TK (P) sensor fail, N2 HFO TK (S) sensor fail, S/Tube AFT Bearing Temperature signal converter calibration in range Pt100 to 4...20 mA from 0 to 100Deg C.
7. Power plant management system tests and verifications.

Photo 1

I

Nordatlantic

Project

1. Telephone system check and repair
From 09:00 To 11:00

Photo 1

I

Panarea M

Project

1. Ballast level gauging system calibration:
Maker: Kongsberg Model: GL-100
Sensor maker: Nordic Flow Control
2. Battery charger and batteries inspection.

Service hours
From: 1:00
To: 2:00

After loading completed:
From: 6:00
To: 8:00

Photo 1

I

Panarea M

Project

1. Manifold pressure transmitter system inspection and calibration:
System maker: Panasia Transmitter Maker Danfoss
Model: MBS 4701-2411-1AB08 Range: 0-25 Bar Accuracy: +/- 5%FS

Service hours:
From: 8:00
To: 20:00

Standby hours:

From: 20:00
To: 00:00

Photo 1

I

Bahía Uno

Project

1. Eliminación y restablecimiento de alarma por cable roto en sensor de presión de aceite en motor del M.P Estribor.
2. Panel control alarmas:
- MITSUBISHI S6U MPTK Nº10412

Photo 1

I

Panarea M

Project

1. Manifold pressure transmitter system inspection:
System maker: Panasia Transmitter Maker Danfoss
Model: MBS 4701-2411-1AB08 Range: 0-25 Bar

Photo 1

I

Dan Eagle

Project

1. ODME annual survey:
Maker: Seil Seres Model: S 663 MK III (model 804) SN: 663T299

Photo 1

I

Maersk Saltoro

Project

1. OWS 15 PPM Bilge alarm calibration:
Maker: Brannström Model: Bilgmon 488 SN: A6691
Measuring Cell SN: B7674

Photo 1

I

Dan Eagle

Project

1. OWS 15 ppm Bilge alarm calibration:
Maker: Bristol Babcock Model: OPM 1 SN: 115285
2. ODME annual survey:
Maker: Seil Seres Model: S 663 MK III (model 804) SN: 663T299

Photo 1

I

Sand Shiner

Project

1. Temperature calibrator calibration:
Maker: Nagman Model: 650 H SN: HT051210963
2. Pressure calibrator calibration:
. Gauge:
Maker: Sika Model: 700 Bar SN: 039790
. Hand pump:
Maker: Sika Model: HTP1 P-700 SN: 230315
3. Pressure calibrator calibration:
. Gauge:
Maker: Wika Model: 700 Bar SN: 1444256
. Hand pump:
Maker: Sika Model: P40.2 SN: EPPM040EBL0000
4. OWS 15 ppm calibration:
Maker: Deckma Model: OMD-21 SN: 214085

Photo 1

I

Rhino

Project

1. UTI calibration:
Maker: MMC Model: D-2401-2 SN: 4080N
2. UTI calibration:
Maker: MMC Model: D-2401-2 SN: 5654N
3. UTI calibration:
Maker: MMC Model: D-2401-2 SN: 5634N
4. Portable gas detector inspection
Maker: Dräger Model: X-am 2000 SN: ARZK 0604
5. Portable gas detector inspection
Maker: Dräger Model: X-am 2000 SN: ARCE 2853
6. Portable gas detector inspection
Maker: Dräger Model: X-am 2000 SN: ARCE 2857
7. Portable gas detector inspection
Maker: Dräger Model: X-am 7000 SN: ARCE-0169
8. Portable gas detector inspection
Maker: Dräger Model: X-am 7000 SN: ARXM-0553
9. Portable gas detector inspection
Maker: Dräger Model: X-am 7000 SN: ARZL-0032

Photo 1

I

Icon

Project

1. New 15 ppm bilge alarm install:
Maker: Brannstöm Model: Bilgmon 488 MCU SN: 4A-1979
Measuring Cell SN: 1B-0428

Photo 1

I

Flagship Tulip

Project

1. UTI calibration:
Maker: Tanktech Model: T2000-TFC-02 SN: TFCA30890101

Photo 1

I

SFL Clyde

Project

1. Fuel gauging system inspection:
Maker: Hoppe Model: Tank content and draught measuring
system
2. Draught inspection:
Maker: Hoppe Model: Tank content and draught measuring
system
3. Ballast gauging system inspection:
Maker: Hoppe Model: Tank content and draught measuring
system

Photo 1

I

SFL Clyde

Project

1. Water Ingress Alarm System:
Maker: Panasia SN: 375-MP-1
2. Ballast gauging system inspection:
Maker: Hoppe Model: Tank content and draught measuring system
3. Draught inspection:
Maker: Hoppe Model: Tank content and draught measuring system

Photo 1

I

Imrikly

Project

1. Inspection and repair of fore draught reading system.
2. Inspection and repair of the cargo lines pressure gaugings system
3. Inspection and repair of ballast level gauging system
4. Inspection and repair of engine bunkers level gauging.
5. Inspection and repair of horm system.

Used intruments:

Fluke 725 with SN: 7521082

Time:

Travel: 7h
JOB: From 18 to 2H

Photo 1

I

SFL Clyde

Project

1. Portable gas calibration
• RIKEN KEIKI GX-8000 [SN. 176010345EBS]
• RIKEN KEIKI GX-2009 [Ser No.277031416RN]
• RIKEN KEIKI GX-2009 [Ser No.277031414RN]
• RIKEN KEIKI GX-2009 [Ser No.277031415RN]
2. Temperature instrument calibration
Maker: Sika Model: TP17650M SN: 1209104
3. Pressure instrument calibration:
• Gauge:
Maker: Sika Model: 40 Bar SN: 3852-11
• Handpump:
Maker: Sika Model: P40-2 SN: PPM040EBL0000
4. 15 ppm bilge alarm calibration and OWS annual survey
• OWS:
Maker: Alfa Laval Model: Purebilge 5015S SN: PM 11M1013
• 15 ppm bilge alarm:
Maker: Deckma Model: OMD-24 SN: 2002515 / 4009335

Photo 1

I

Castillo de Pambre

Project

1. Calibration of OWS. Maker: Deckma Model: OMD-24 SN: 2003439 with measure cell: 4003735. The patron mixture from Deckma with SN: 18510 according MEPC107(49)
2. Calibration of Display of Temperature Indicator Maker: Fema Model: M40-T-L with SN: 404916
3. Calibration of Display 4-20 mA. Maker: Fema . Model: M40-P-L with SN: 405248.
4. Calibration of Display of pressure indicator. Maker: Fema . Model: M40-P-L with SN: 404917 Range: -1...9 Bar
5. Calibration of Display of pressure indicator. Maker: Fema . Model: M40-P-L with SN: 405248 Range: 0-1000Bar
6. Calibration of Pressure Sensor. Maker: Roxpur . Model: 461-250with SN: 460818 Range: -1...9 Bar
7. Calibration of Pressure Sensor. Maker: Gems . Model: 3100B1000S2TB000RS with SN: XT108263TP-071-13-0007 Range: 0-1000Bar

The pressure instruments has been calibrated with patron Maker: Fluke Model: 700G07 with SN: 3226081.

The temperature instruments has been calibrated with Fluke 725 With SN: 7521082

Photo 1

I

Sichem Aneline

Project

Portable gas calibration:

1. Combustable Detector RIKEN KEIKI RX-8000 [ SN. 651015459 ]
2. Combustable Detector RIKEN KEIKI GX-8000 [ SN. 671010025RN]
3. Oxygen Meter RIKEN KEIKI RX-415 [ Ser No. 893080054RN ]
4. Oxygen Meter RIKEN KEIKI RX-415 [ Ser No. 893080055RN ]
5. Multi Detection Meter Gas RIKEN KEIKI GX-2009 [Ser No.640092078RN]
6. Multi Detection Meter Gas RIKEN KEIKI GX-2009 [Ser No.883020172RN]
7. Multi Detection Meter Gas RIKEN KEIKI GX-2009 [Ser No.640092080RN]
8. Multi Detection Meter Gas RIKEN KEIKI GX-2009 [Ser No.883020174RN]